For years the 3440 has been considered one of our most versatile DC motors available. The 3440 has a plastic outer shell with an interchangeable gear train for RPM’s from .5 to 115 to meet your specifications. The output shaft is typically .125 with approximately 20 variations, customization is also available to meet your specific application. These DC motors are available in .4V, 3V, 6V, and 12 volt models.

The GA DC electric motor is the smallest, yet powerful model available in the G series with a length of 2.5" including the output shaft and 1" diameter output shafts and leads can be modified to your specifications. GA DC motors are available in 3, 6 or 12 volts with RPM’s ranging from 12 to 320.

The GB DC electric motor is a powerful little DC electric motor with an in line gear train and heavy duty gear box.  The GB has higher voltage and a slightly larger footprint than the GA motor, the GB dimensions are 4" in length and 1.5" diameter . The output shafts and leads can be modified to your specifications.  GB DC motors are available in 12 or 24 volt models.

The SNPDC electric motor is the latest addition to the DC electric motor line. It's advantages are clear: High torque, small package, and identical mounting configuration to our synchronous line. It can work as a replacement where low DC voltage is needed. The SNPDC is currently available in 4, 16, or 20, 30, or 60 rpm's. And available in 6, 12, and 24 volts. Additional rpm's and shaft configurations upon your request.

           Home Page           Contact Us                Site Map